Rubber Matting Rolls UK | Cut to Length | All Compounds | Free Delivery
9 products
9 products
Description
Updated June 2026 — Extended buyer's guide, compound selector, thickness calculator, and expanded FAQ.
Rubber Matting Rolls UK — Cut to Any Length, Sold by the Metre
Our rubber matting rolls deliver professional-grade continuous flooring for industrial factories, commercial gyms, stables, garages, warehouses, commercial kitchens, and anywhere continuous matting coverage is needed. Every roll is sold by the metre and cut to your exact required length — no minimum order, no wastage. With free UK delivery and same-day dispatch on orders before 2pm, Rubberco is the UK's go-to source for rubber roll matting.
Rubber matting rolls are the most cost-effective format for covering large areas. Compared to interlocking tiles, rolls eliminate joins (important under machinery and in high-traffic corridors), provide a seamless surface that is easier to clean, and typically carry a lower cost per m².
Why Buy Rubber Matting Rolls from Rubberco?
- 60+ years experience supplying UK industry — we know which product works for which application
- Full compound range: SBR, EPDM, Nitrile, Neoprene, Natural Rubber, BS EN 61111 Insulating
- Cut to any length — 0.25m minimum, no maximum
- Widths from 1.0m to 2.0m — standard commercial widths in stock
- Free UK delivery on all orders
- Same-day dispatch on in-stock rolls ordered before 2pm
- Technical advice from rubber specialists — call us before ordering if unsure
Rubber Matting Roll Surface Patterns — Which Do You Need?
| Surface Pattern | Best Applications | Key Benefit | Not Ideal For |
|---|---|---|---|
| Fine Ribbed | Corridors, walkways, ramps, van floors | Directional grip, channels water away | Areas needing omnidirectional grip |
| Diamond / Checker Plate | Industrial workshops, loading bays, garages | Aggressive anti-slip, heavy traffic | Forklift routes (studs can shear) |
| Studded / Penny Dot | Ramps, staircases, wet areas, pool surrounds | Omnidirectional grip, visible drainage | Under wheeled equipment |
| Smooth (Flat) | Van liners, wall protection, gasket cutting, workbenches | Easy clean, no debris catch | Wet pedestrian areas |
| Heavy-Duty SBR (Gym Roll) | Gyms, weight rooms, commercial fitness centres | Maximum impact absorption, 10–15mm thick | Outdoor use |
Rubber Matting Roll Compound Guide
Matching the rubber compound to the environment is critical for longevity. The wrong compound fails prematurely and costs significantly more over time.
| Compound | Ideal Environment | Key Properties | Avoid For |
|---|---|---|---|
| SBR | Indoor commercial and industrial | Cost-effective, durable, excellent grip | Oil exposure, outdoor UV |
| EPDM | Outdoor / UV-exposed areas | UV and ozone resistant, -40°C to +120°C | Oil/fuel contact environments |
| Nitrile (NBR) | Garages, workshops, hydraulic areas | Oil and chemical resistant | UV-exposed outdoor use |
| Neoprene (CR) | Marine, moderate oil and weather | Flame retardant, balanced oil/UV resistance | High oil concentration areas |
| BS EN 61111 | Electrical substations, switchgear | High-voltage electrical insulation | General-purpose use |
Rubber Matting Roll Thickness Guide
| Application | Recommended Thickness | Traffic Tolerance | Notes |
|---|---|---|---|
| Light commercial corridor | 3–4mm | Pedestrian only | Economical, easy to cut |
| Industrial walkway | 6–8mm | Pedestrian + light trolleys | Good grip, long lasting |
| Garage floor | 6–10mm | Car + light vehicles | Specify nitrile for oil resistance |
| Workshop / factory floor | 8–15mm | Manual pallet trucks, sack barrows | Anti-fatigue benefit at 10mm+ |
| Gym flooring | 10–20mm | Heavy weights, dropped equipment | Impact absorption for weight training |
| Stable / equestrian | 12–20mm | Animals + equipment | Cushioning, easy to hose down |
| Forklift area | 15–20mm | Counterbalance and reach truck | Must be bonded to subfloor |
| Van / vehicle lining | 3–6mm | Loading/unloading, tool storage | Lightweight, cut to van profile |
How to Measure & Calculate Rubber Roll Quantities
- Measure the width of your area in metres
- Choose the nearest roll width (1.0m, 1.25m, 1.5m, 2.0m)
- Measure the length you need to cover
- Multiple strips needed? Multiply length × number of strips
- Add 10% waste allowance for cutting
Example: Covering a 3.5m wide corridor with 1.25m wide rolls — 3 strips × corridor length. 12m corridor: 3 × 12 × 1.1 = 39.6m. Order 40 metres.
Use our rubber flooring calculator for complex areas.
How to Install Rubber Matting Rolls
- Acclimatise: Unroll and allow 24–48 hours at room temperature before cutting
- Prepare subfloor: Clean, dry concrete. Fill cracks. Apply DPM if moisture risk.
- Dry lay first: Check fit and cut lines before bonding
- Cut to length: Sharp utility knife against steel straight edge. Score and flex for thick rolls.
- Loose-lay (light traffic): Secure perimeter with double-sided tape or edge trim
- Bonded (heavy traffic): Contact adhesive to both surfaces, allow touch-dry, press and roll firmly
- Seal joints: Rubber jointing tape or cold-weld adhesive at all butt joins
Applications in Detail
Corridor & Walkway Rubber Roll Matting
Ribbed rubber matting rolls are the standard specification for UK commercial corridors. Directional ribbing channels water away from footfall areas, reducing slip risk. 4–6mm thick for light use; 6–8mm for heavy pedestrian traffic. Colour options allow visual walkway demarcation for HSE compliance.
Workshop & Garage Rubber Roll Matting
Diamond checker plate rubber rolls in nitrile compound are the professional specification for UK workshops and garages with oil exposure. Aggressive checker pattern provides grip even on oily surfaces. Thickness 6–10mm. Smooth nitrile under machinery for stability.
Gym Rubber Rolls
Heavy-duty SBR gym rubber rolls (10–15mm) provide seamless flooring preferred in commercial gyms where equipment legs need to rest flat without tile joins. Roll format also eliminates tile separation under lateral loads from rope climbs or sled pushes.
Stable & Agricultural Rubber Roll
Stable matting in roll format (12–17mm, 1.83m or 2.0m wide) provides continuous coverage across stable floors without joins where bedding accumulates. Wide formats reduce seams per stable. Smooth surface for easy mucking out.
Van & Vehicle Rubber Roll Lining
3–4mm smooth SBR or ribbed rubber rolls protect van floors, reduce noise, and provide grip for loads. Cut with scissors or knife to match the van floor profile.
Technical Specifications
| Property | SBR Standard | EPDM | Nitrile |
|---|---|---|---|
| Density | ~1,100 kg/m³ | ~1,150 kg/m³ | ~1,200 kg/m³ |
| Hardness (Shore A) | 60–70 | 55–70 | 60–75 |
| Temp range | -20°C to +70°C | -40°C to +120°C | -30°C to +100°C |
| UV resistance | Poor — indoor only | Excellent | Good |
| Oil resistance | Poor | Poor | Excellent |
| Slip resistance | R10/R11 | R10 | R10 |
Frequently Asked Questions
Can rubber matting rolls be cut to size?
Yes. All our rubber matting rolls are sold by the metre and cut to your exact required length. From 0.25m to 50m+, we cut precisely to order. No minimum order — you pay only for what you need.
What rubber matting roll for a garage?
For a standard UK garage with oil risk: 6mm nitrile (NBR) roll in diamond or studded pattern. Without oil risk: SBR rubber rolls at 6–10mm are more economical. See our garage rubber flooring guide.
What width do rubber matting rolls come in?
Standard widths: 1.0m, 1.2m, 1.25m, 1.5m, and 2.0m. The 1.25m width is our bestseller for corridors and commercial walkways.
Is rubber matting roll suitable for outdoor use?
SBR rubber rolls are for indoor use only — UV exposure causes discolouration and stiffening. For outdoor applications, specify EPDM rubber rolls — UV-stabilised and rated for year-round UK weather.
How do I calculate how much rubber matting roll I need?
Area width ÷ roll width = strips needed. Strips × run length × 1.1 (10% waste) = total metres to order. Use our rubber flooring calculator for complex shapes.
Do rubber matting rolls need adhesive?
Light traffic: loose-lay with edge trim is adequate. Any area with wheeled vehicles must be fully bonded with contact adhesive — loose matting shifts under vehicle wheel loads, creating dangerous edges and accelerating wear.
Can I get a sample before ordering?
Yes — contact our team for a free 200mm × 200mm sample of any standard roll product. Check thickness, hardness, grip, and colour before ordering. Typically delivered within 2–3 days.
What Our Customers Say
Verified reviews from UK buyers
