- Premium tufted logo mats offer superior colour-fastness and wash-fastness
- High twist heat set Nylon yarn resists crushing and traps dirt and moisture
- Fade resistant - Solution dyed nylon is impervious to bleach and UV Resistant
- Fully launderable
- 43 standard colours
Recommended Uses
Recommended for indoor commercial use at entryways, in lobbies, at front desks or anywhere you want to display your company logo, slogan, artwork, or message to customers/visitors or employees.
Available Sizes
60 x 85 cm
75 x 85 cm
85 x 150 cm, 85 x 300cm
150 x 200 cm, 150 x 300 cm
Special sizes available.
Maximum size: 200 x 1000 cm or 240 x 550 cm
Specifications
- YARN: Continuous filament Solution Dyed Nylon Type 6
- WEIGHT: 1.000 g/m²PILE HEIGHT: 11,3 mm
- TOTAL WEIGHT: 3.2kg/m²
- PRIMARY BACKING: Polyester Spun bound Non-woven Fabric 120g/m²
- RUBBER BACKING: 100% Nitrile EXS Rubber. Compression-molded with reinforced borders for excellent dimensional stability and lay-flat properties
- RUBBER BODY THICKNESS: 1.7mm
- RUBBER BORDER THICKNESS: 3mm
- BORDER WIDTH: 1.5mm
- SIZE VARIANCE: +- 2%
Laundering Instructions
-
- Flush, 2-3 Min. on a medium water level with a maximum temperature of 49°C
- Flush (optional), 2-3 Min. on a medium water level with a maximum temperature of 49 °C
- Break, 2-3 Min. on a high water level with a maximum temperature of 49 °C
- Rinse, 2 Min. on a high water level with cold temperature
- Rinse, 2 Min. on a high water level with cold temperature
- Extract on low speed, 1-2 Min.
- Shake out with the drum turning, 1 Min.
- Extract, on a maximum of 250G, 3-5 Min.
- Dry (optional), 5-10 Min. with a maximum basket temperature of 82 °C
- Cool down, 5 Min.
Additional Recommendations:
- It's recommended that Optibrush mats are washed separate from other mats.
- Optigraphic & Diplomats can be washed together with other SDN mats.
- For Heavy Soiled Mats, increase temperature up to max. 71°C.
- Break should not exceed pH of 9,5; use low pH non-ionic detergents.
- Do not overdry mats; Basket-temperature of dryer should not exceed 82°C.
- If mats are not dried, final rinse can be increased to 49°C. This will reduce moisture retention following extraction.
- Lay Mats flat following removal from washer; allow mats to cool before rolling.
Cleaning Instructions
Optibrush mats can be cleaned in several different ways.
- They can be commercially laundered (see Laundering Instructions)
- Vacuumed regularly (daily in high-traffic areas; weekly in lower-traffic applications)
- Cleaned with an extractor, or hosed off as necessary to remove heavy soil.
Hang to dry.Mats should always be dry before they are placed back in service.